Information name |
Level |
Possible causes |
Hardware protection |
Protection |
Ø Overvoltage Ø Over-current Ø IGBT fault |
Overvoltage |
Protection |
Ø When multiple frequency converters run, they may be temporarily in a power generation Ø The deceleration time is too short. Ø Input voltage is abnormal Ø Have energy feedback load Ø Alarm limit parameters are set too low. |
Over-speed |
Protection |
Ø Position cannot be identified when starting Ø Software fault |
Software over-current |
Protection |
Ø The over-current setting value is too low. |
Under-voltage |
Protection |
Ø Alarm limit parameters are set too large. Ø Input voltage is abnormal Ø Other heavy loads start in the grid, causing the input voltage to fall |
Overtemperature protection |
Protection |
Ø The radiator is high at front and low at back, and the heat pipe radiator doesn't work properly Ø Overload running for long time Ø Deficiency in draft Ø The environment temperature is too high |
©1996-2017 晉ICP備07500050號 Huaxin Copyright
©2016-2017 晉ICP備07500050號 Huaxin Copyright