官场小说排行榜,天下高月小说,大主宰之灵路天蚕土豆

Hello, welcome to Huaxin

中文
- Home
- Products
- Industries
- Service
- Media
- Careers
- About
- Contact Us
- Message
- Online Pay

Electrical Flat Copper Wire and Flat Aluminum Wire

The Electrical Flat Copper Wire is a conductor extruded or drawn from the oxygen-free copper rod through certain molding. The Electrical Flat Copper Wire can be taken as the finished product for use, and can also be an in-progress product, which is widely applied for windings of the motors, transformers, reactors and other similar electrical equipment.

The Electrical Flat Aluminum Wire is a conductor formed through continuous extrusion from the oil-free electrical round aluminum rod through certain molding, and is widely applied for the windings of the motors, transformers, electric welding machines and other similar electrical equipment.

Technical Parameters
External Dimensions of the Products
Product Features

The Tensile Strength and Elongation of the Flat Copper Wire shall conform to the provisions in the following table:　　

Nominal Dimension / mm	Soft Flat Copper Wire TBR		H1 State Hard Flat Copper Wire TBY1		H2 State Hard Flat Copper Wire TBY2
Nominal Dimension / mm	Tensile Strength N/ mm2 ≤	Elongation %≥	Tensile Strength N/ mm2	Elongation %≥	Tensile Strength N/ mm2 ≥	Elongation %≥
0.80 ＜a≤ 2.00	275	30	275~373	1.5	373	0.4
2.00＜a≤ 4.00	255	34	255~333	2.0	333	0.7
4.00＜a≤ 5.60	245	36	245~304	3.0	304	1.7

Dimensions of the Narrow Edge and Wide Edge of the Flat Copper Wire shall conform to the provisions in the following table:

Dimensions of the Narrow Edge / mm	Deviation / mm	Dimensions of the Wide Edge / mm	Deviation / mm
a≤3.15	±0.03	b≤3.15	±0.03
3.15＜a≤5.60	±0.05	3.15＜b≤6.30	±0.05
		6.30＜b≤12.50	±0.07
		12.50＜b≤16.00	±0.10

R Angle of the Flat Copper Wire shall conform to the provisions in the following table:

Nominal Dimension / mm	Radius of the Round Angle r		Nominal Dimension / mm	Radius of the Round Angle r
	Nominal	Deviation		Nominal	Deviation
a≤1.00	a/2	±25%	2.44＜a≤3.55	0.80	±25%
1.00＜a≤1.60	0.5a		3.55＜a≤5.60	1.00
1.60＜a≤2.44	0.65b
a) If agreed through negotiations between the manufacturer and the user, for the flat wire with wide edge larger than 4.75 mm, radius of the filleted corner can be: 1. semi-circle; 2. 0.80 mm b) If agreed through negotiations between the manufacturer and the user, the radius of the filleted corner of the copper strip can be a/2

Dimensions of the Narrow Edge and Wide Edge of the Flat Aluminum Wire shall conform to provisions in the following table:　　　　　　　　　　　　　　　　

Dimensions of the Narrow Edge / mm	Deviation / mm	Dimensions of the Wide Edge / mm	Deviation / mm
a≤3.15	±0.03	b≤3.15	±0.03
3.15＜a≤5.60	±0.05	3.15＜b≤6.30	±0.05
		6.30＜b≤12.50	±0.07
		12.50＜b≤16.00	±0.10

Angle R of the Flat Aluminum Wire shall conform to the provisions in the following table:

Nominal Dimension a/mm	Radius of the Round Angle r		Nominal Dimension a/mm	Radius of the Round Angle r
	Nominal	Deviation		Nominal	Deviation
a≤1.00	a/2	a≤2.50	2.44＜a≤3.55	0.80	±25%
1.00＜a≤1.60	0.5a		3.55＜a≤5.60	1.00
1.60＜a≤2.44	0.65b
a) If agreed through negotiations between the manufacturer and the user, for the flat wire with wide edge larger than 4.75 mm, radius of the filleted corner can be: 1. semi-circle; 2. 0.80 mm

Flat Copper Wire
    Dimension of the Narrow Edge a: 0.90mm - 5.60mm
    Dimension of the Wide Edge b: 2.00mm - 16.00mm
    If specifications selected exceed the above scope, please contact us
Flat Aluminum Wire
    Production Scope: 4 mm² - 350 mm²
    Dimension of the Narrow Edge a: 0.7mm-10mm
    Dimension of the Wide Edge b: 3.0mm-38mm
The Electrical Copper and Aluminum Flat Wires have the advantages of smooth conductor surface, burr-free, uniform dimensions and tensile strength, low resistivity, etc. It can be used as a finished product, and can also be used as an in-progress product.