The functions of the Supply Transformer include power transmission, voltage change and insulation isolation. As a kind of main soft magnetic and electromagnetic elements, it is widely applied in power transmission and power electronics technology.
TD Series Supply Transformer is applicable for the circuit with AC 50-60Hz and voltage below 1140V as the isolated power. The series of products have excellent performance, safety, reliability and other features, and have been widely applied in frequency conversion, PV, wind power, medical devices and other fields.
Model Description
Technical Parameters
Model | Capacity(KVA) | Primary Voltage(V) | Secondary Voltage(V) | Insulation Class |
TDA 300-780 | 300 | 780/720 | 220/36 | A |
TDA 300-1350 | 300 | 1350/1140 | 220/36 | A |
TDA 480-1140 | 480 | 1140 | 220/127 | A |
TDA 480-1350 | 480 | 1350/1140 | 220/36 | A |
TDA 750-780 | 750 | 780/660 | 210/36 | A |
TDA 850-720 | 850 | 720/690 | 220/36/127 | A |
TDA 900-1140 | 900 | 1140 | 220/36 | A |
Model | L × W × H (mm) | Total Weight (kg) |
TDA 300-780 | 116×105×135 | 5 |
TDA 300-1350 | 116×105×135 | 5 |
TDA 480-1140 | 135×120×145 | 7 |
TDA 480-1350 | 135×120×145 | 7 |
TDA 750-780 | 155×140×170 | 11 |
TDA 850-720 | 155×140×170 | 12 |
TDA 900-1140 | 155×175×170 | 18 |
1. The iron core of the Supply Transformer is E-shaped, which is of housing structure (coil wrapping iron core).
2. The supply transformer has two windings, a primary winding and a secondary winding. Therefore, there are four leading-out terminals. In order to prevent AC hum and other disturbance, a shielding layer is often added between the primary and the secondary windings, and the shielding layer is the grounding terminal. Therefore, there are at least 4 wiring terminals of the supply transformer.
3. The silicon steel sheet of E-shaped Supply Transformer is inserted alternatively, no air gap is reserved between the E and I plates, so the whole iron core fits together perfectly.
1.The elevation height shall not exceed 1000 m, and it is derated for use above 1000 m;
2. Ambient temperature: -25 to 55℃
3. Relative humidity: ≤95%
4. The installation site shall be free of gas, chemical deposition, dust and other explosive and corrosive media with influence on transformer insulation.
©1996-2023 晉ICP備07500050號(hào) Huaxin Copyright
©1996-2023 晉ICP備07500050號(hào) Huaxin Copyright