Electrical Flat Copper Wire and Flat Aluminum Wire
The Electrical Flat Copper Wire is a conductor extruded or drawn from the oxygen-free copper rod through certain molding. The Electrical Flat Copper Wire can be taken as the finished product for use, and can also be an in-progress product, which is widely applied for windings of the motors, transformers, reactors and other similar electrical equipment.
The Electrical Flat Aluminum Wire is a conductor formed through continuous extrusion from the oil-free electrical round aluminum rod through certain molding, and is widely applied for the windings of the motors, transformers, electric welding machines and other similar electrical equipment.
The Tensile Strength and Elongation of the Flat Copper Wire shall conform to the provisions in the following table:
Nominal Dimension / mm
Soft Flat Copper Wire TBR
H1 State Hard Flat Copper Wire TBY1
H2 State Hard Flat Copper Wire TBY2
Tensile Strength
N/ mm2 ≤Elongation
%≥Tensile Strength
N/ mm2Elongation
%≥Tensile Strength
N/ mm2 ≥Elongation
%≥0.80 ＜a≤ 2.00
275
30
275~373
1.5
373
0.4
2.00＜a≤ 4.00
255
34
255~333
2.0
333
0.7
4.00＜a≤ 5.60
245
36
245~304
3.0
304
1.7
Dimensions of the Narrow Edge and Wide Edge of the Flat Copper Wire shall conform to the provisions in the following table:Dimensions of the Narrow Edge / mm
Deviation / mm
Dimensions of the Wide Edge / mm
Deviation / mm
a≤3.15
±0.03
b≤3.15
±0.03
3.15＜a≤5.60
±0.05
3.15＜b≤6.30
±0.05
6.30＜b≤12.50
±0.07
12.50＜b≤16.00
±0.10
R Angle of the Flat Copper Wire shall conform to the provisions in the following table:
Nominal Dimension / mm
Radius of the Round Angle r
Nominal Dimension / mm
Radius of the Round Angle r
Nominal
Deviation
Nominal
Deviation
a≤1.00
a/2
±25%
2.44＜a≤3.55
0.80
±25%
1.00＜a≤1.60
0.5a
3.55＜a≤5.60
1.00
1.60＜a≤2.44
0.65b
a) If agreed through negotiations between the manufacturer and the user, for the flat wire with wide edge larger than 4.75 mm, radius of the filleted corner can be:
1. semi-circle; 2. 0.80 mm
b) If agreed through negotiations between the manufacturer and the user, the radius of the filleted corner of the copper strip can be a/2Dimensions of the Narrow Edge and Wide Edge of the Flat Aluminum Wire shall conform to provisions in the following table:
Dimensions of the Narrow Edge / mm
Deviation / mm
Dimensions of the Wide Edge / mm
Deviation / mm
a≤3.15
±0.03
b≤3.15
±0.03
3.15＜a≤5.60
±0.05
3.15＜b≤6.30
±0.05
6.30＜b≤12.50
±0.07
12.50＜b≤16.00
±0.10
Angle R of the Flat Aluminum Wire shall conform to the provisions in the following table:Nominal Dimension a/mm
Radius of the Round Angle r
Nominal Dimension a/mm
Radius of the Round Angle r
Nominal
Deviation
Nominal
Deviation
a≤1.00
a/2
a≤2.50
2.44＜a≤3.55
0.80
±25%
1.00＜a≤1.60
0.5a
3.55＜a≤5.60
1.00
1.60＜a≤2.44
0.65b
a) If agreed through negotiations between the manufacturer and the user, for the flat wire with wide edge larger than 4.75 mm, radius of the filleted corner can be:
1. semi-circle; 2. 0.80 mmFlat Copper Wire
Dimension of the Narrow Edge a: 0.90mm - 5.60mm
Dimension of the Wide Edge b: 2.00mm - 16.00mm
If specifications selected exceed the above scope, please contact usFlat Aluminum Wire
Production Scope: 4 mm2 - 350 mm2
Dimension of the Narrow Edge a: 0.7mm-10mm
Dimension of the Wide Edge b: 3.0mm-38mmThe Electrical Copper and Aluminum Flat Wires have the advantages of smooth conductor surface, burr-free, uniform dimensions and tensile strength, low resistivity, etc. It can be used as a finished product, and can also be used as an in-progress product.
Contact information
Close
Close
-
About Huaxin
-
Follow Us
-
Share Us
©1996-2023 晉ICP備07500050號 Huaxin Copyright
©1996-2023 晉ICP備07500050號 Huaxin Copyright
